Stainless Steel Chairs Spec Sheet for Banquet Halls

By Foshanchair · 2026-11-08 · Stainless Steel Chairs

Written by the Foshanchair production team in Foshan. Updated 2026-11-08. Every model referenced below is in current production and can be ordered made-to-spec.

Key takeaways

1. Seat height and how to match your table

Standard dining seat height is 45–48 cm paired with a 72–75 cm table, leaving roughly 27–30 cm of clearance. For stainless steel chairs used at counters or bars that figure changes to 65 cm and 75 cm seat heights. Get this wrong and no amount of styling saves the room — clearance is the number guests feel first.

2. Seat depth, width and backrest angle

Seat depth of 40–45 cm suits most adults; deeper seats push shorter guests forward off the backrest. Width of 42–48 cm balances comfort against how many you can fit along a banquette. A 5–8 degree recline is the sweet spot for banquet and event seating: enough to relax, not so much that guests slide.

3. Weight capacity and testing

Contract seating should be rated well above average body weight because the real load is dynamic — people drop into chairs. Ask for the static load rating on the polished steel frame and, if the chair stacks, how many units high it can be stacked without deforming. Both numbers belong on the spec sheet you sign off.

4. Stacking, nesting and storage maths

Storage decides whether you can host events. A stackable model at 5–10 units high turns a storage closet into real capacity. Measure your closet height before ordering, then subtract 10 cm for handling clearance — the specification that kills most storage plans is the ceiling, not the chair.

5. How to write the spec into your RFQ

Put six numbers in your request: seat height, seat depth, frame material and gauge, finish type, load rating, and quantity. Suppliers quote faster and you can compare line by line. Vague RFQs get vague quotes, and the difference shows up as a surprise on the invoice.

Specification snapshot

ModelMaterialStyleTypical useFactory priceMOQ
Foshanchair Luxury Dining Chairs Metal Stainlessiron/Stainless steel/solid woodModernDining room, Restaurant$90–$9810 pcs
Foshanchair Chair Nordic Upholstered Stainlessiron/Stainless steel/solid woodModernDining room, Restaurant$90–$10010 pcs
Foshanchair Modern Armless Soft Dining Chairiron/Stainless steel/solid woodModernDining room, Restaurant$90–$9810 pcs
Foshanchair Light Luxury Stainless Steel Dining Stainless steel/LeatherModernDining room, Restaurant$58–$6510 pcs
Foshanchair Metal Leg Dining Chair Moderniron/Stainless steel/solid woodModernDining room, Restaurant$35–$4010 pcs
Foshanchair Modern Simple Metal Dining Chairiron/Stainless steel/solid woodModernDining room, Restaurant$56–$5610 pcs

Models referenced in this article

Foshanchair Luxury Dining Chairs Metal Stainless Foshanchair Luxury Dining Chairs Metal Stainless $90–$98 · MOQ 10 pcs · iron/Stainless steel/solid wood Foshanchair Chair Nordic Upholstered Stainless Foshanchair Chair Nordic Upholstered Stainless $90–$100 · MOQ 10 pcs · iron/Stainless steel/solid wood Foshanchair Modern Armless Soft Dining Chair Foshanchair Modern Armless Soft Dining Chair $90–$98 · MOQ 10 pcs · iron/Stainless steel/solid wood Foshanchair Light Luxury Stainless Steel Dining Chairs Foshanchair Light Luxury Stainless Steel Dining Chairs $58–$65 · MOQ 10 pcs · Stainless steel/Leather Foshanchair Metal Leg Dining Chair Modern Foshanchair Metal Leg Dining Chair Modern $35–$40 · MOQ 10 pcs · iron/Stainless steel/solid wood Foshanchair Modern Simple Metal Dining Chair Foshanchair Modern Simple Metal Dining Chair $56 · MOQ 10 pcs · iron/Stainless steel/solid wood

Key terms used in this guide

Frequently asked questions

What is the MOQ for stainless steel chairs?

Stocked models start from 10 pieces per model and can be mixed within one container. Made-to-spec runs start higher because the line has to be set up for your finish.

How long does production take?

15–25 days after sample approval for most stainless steel chairs, plus 3–7 days for sampling and then transit. Custom fabric or colour adds about a week.

Can I get a sample before ordering?

Yes. We ship a single sample for approval; sampling is the step that fixes every later date, so we recommend doing it before locking an opening schedule.

Do you support custom colours and fabrics?

Yes — frame colour, upholstery fabric, seat density and logo application are all available on stainless steel chairs. Custom work adds roughly 5–10 days.

What seat height works with a standard table?

45–48 cm seat with a 72–75 cm table, leaving 27–30 cm of clearance. Counter and bar heights are 65 cm and 75 cm.

How many chairs stack safely?

Most stackable models in this range stack 5–10 high. Check the spec and subtract 10 cm from your storage height for handling clearance.

Next steps

Browse the full Foshanchair catalog, read the Stainless Steel Chairs archive, or request a factory quote with your quantity and finish. We answer quote requests within one working day.

Related reading: Importing Stainless Steel Chairs: MOQ, Price & Lead Time · Importing Stainless Steel Chairs: MOQ, Price & Lead Time · Stainless Steel Chairs Spec Sheet for Cafés · Importing Stainless Steel Chairs: MOQ, Price & Lead Time

Browse the catalog by category