Tatami & Low Chairs Spec Sheet for Banquet Halls

By Foshanchair · 2026-11-12 · Tatami & Low Chairs

Written by the Foshanchair production team in Foshan. Updated 2026-11-12. Every model referenced below is in current production and can be ordered made-to-spec.

Key takeaways

1. Seat height and how to match your table

Standard dining seat height is 45–48 cm paired with a 72–75 cm table, leaving roughly 27–30 cm of clearance. For tatami chairs used at counters or bars that figure changes to 65 cm and 75 cm seat heights. Get this wrong and no amount of styling saves the room — clearance is the number guests feel first.

2. Seat depth, width and backrest angle

Seat depth of 40–45 cm suits most adults; deeper seats push shorter guests forward off the backrest. Width of 42–48 cm balances comfort against how many you can fit along a banquette. A 5–8 degree recline is the sweet spot for banquet and event seating: enough to relax, not so much that guests slide.

3. Weight capacity and testing

Contract seating should be rated well above average body weight because the real load is dynamic — people drop into chairs. Ask for the static load rating on the low-profile wood frame and, if the chair stacks, how many units high it can be stacked without deforming. Both numbers belong on the spec sheet you sign off.

4. Stacking, nesting and storage maths

Storage decides whether you can host events. A stackable model at 5–10 units high turns a storage closet into real capacity. Measure your closet height before ordering, then subtract 10 cm for handling clearance — the specification that kills most storage plans is the ceiling, not the chair.

5. How to write the spec into your RFQ

Put six numbers in your request: seat height, seat depth, frame material and gauge, finish type, load rating, and quantity. Suppliers quote faster and you can compare line by line. Vague RFQs get vague quotes, and the difference shows up as a surprise on the invoice.

Specification snapshot

ModelMaterialStyleTypical useFactory priceMOQ
Foshanchair Japanese Backrest Legless Chair100% Solid WoodModernDining room, Restaurant$28–$3210 pcs
Foshanchair Single Legless Backrest Chair Tatami100% Solid WoodModernDining room, Restaurant$10–$1212 pcs
Foshanchair Legless Tatami Floor Chair Japanese100% Solid WoodModernDining room, Restaurant$12–$1212 pcs
Foshanchair Japanese Tatami Couch Chair Solid WoLeather/Velvet/FabricModernDining room, Restaurant$34–$3612 pcs
Foshanchair Solid Wood Stackable Round Stools HoLeather/Velvet/FabricModernDining room, Restaurant$60–$606 pcs
Foshanchair Elm Wood Mini Stool Chinese AntiqueLeather/Velvet/FabricModernDining room, Restaurant$10–$1212 pcs

Models referenced in this article

Foshanchair Japanese Backrest Legless Chair Foshanchair Japanese Backrest Legless Chair $28–$32 · MOQ 10 pcs · 100% Solid Wood Foshanchair Single Legless Backrest Chair Tatami Foshanchair Single Legless Backrest Chair Tatami $10–$12 · MOQ 12 pcs · 100% Solid Wood Foshanchair Legless Tatami Floor Chair Japanese Foshanchair Legless Tatami Floor Chair Japanese $12 · MOQ 12 pcs · 100% Solid Wood Foshanchair Japanese Tatami Couch Chair Solid Wood Foshanchair Japanese Tatami Couch Chair Solid Wood $34–$36 · MOQ 12 pcs · Leather/Velvet/Fabric Foshanchair Solid Wood Stackable Round Stools Home Foshanchair Solid Wood Stackable Round Stools Home $60 · MOQ 6 pcs · Leather/Velvet/Fabric Foshanchair Elm Wood Mini Stool Chinese Antique Foshanchair Elm Wood Mini Stool Chinese Antique $10–$12 · MOQ 12 pcs · Leather/Velvet/Fabric

Key terms used in this guide

Frequently asked questions

What is the MOQ for tatami chairs?

Stocked models start from 6 pieces per model and can be mixed within one container. Made-to-spec runs start higher because the line has to be set up for your finish.

How long does production take?

15–25 days after sample approval for most tatami chairs, plus 3–7 days for sampling and then transit. Custom fabric or colour adds about a week.

Can I get a sample before ordering?

Yes. We ship a single sample for approval; sampling is the step that fixes every later date, so we recommend doing it before locking an opening schedule.

Do you support custom colours and fabrics?

Yes — frame colour, upholstery fabric, seat density and logo application are all available on tatami chairs. Custom work adds roughly 5–10 days.

What seat height works with a standard table?

45–48 cm seat with a 72–75 cm table, leaving 27–30 cm of clearance. Counter and bar heights are 65 cm and 75 cm.

How many chairs stack safely?

Most stackable models in this range stack 5–10 high. Check the spec and subtract 10 cm from your storage height for handling clearance.

Next steps

Browse the full Foshanchair catalog, read the Tatami & Low Chairs archive, or request a factory quote with your quantity and finish. We answer quote requests within one working day.

Related reading: Importing Tatami & Low Chairs: MOQ, Price & Lead Time · Cleaning & Maintaining Tatami & Low Chairs in Banquet Halls · Tatami & Low Chairs Spec Sheet for Cafés · Importing Tatami & Low Chairs: MOQ, Price & Lead Time

Browse the catalog by category