Solid Wood Dining Chairs Spec Sheet for Restaurants & Hotels
By JP Furniture · 2026-09-23 · Solid Wood Dining Chairs
Written by the JP Furniture production team in Foshan. Updated 2026-09-23. Every model referenced below is in current production and can be ordered made-to-spec.
Key takeaways
- Solid Wood Dining Chairs suit restaurant dining rooms because the kiln-dried hardwood handles daily loading.
- Check seat height against table height first — 45–48 cm with a 72–75 cm top.
- Factory price moves with frame gauge, finish and upholstery grade, not with the photo.
- MOQ can be met by mixing models in one container rather than deepening a single SKU.
- Plan a 10% spare inventory: it turns replacements into a same-week task.
1. Seat height and how to match your table
Standard dining seat height is 45–48 cm paired with a 72–75 cm table, leaving roughly 27–30 cm of clearance. For wooden chairs used at counters or bars that figure changes to 65 cm and 75 cm seat heights. Get this wrong and no amount of styling saves the room — clearance is the number guests feel first.
2. Seat depth, width and backrest angle
Seat depth of 40–45 cm suits most adults; deeper seats push shorter guests forward off the backrest. Width of 42–48 cm balances comfort against how many you can fit along a banquette. A 5–8 degree recline is the sweet spot for restaurant dining rooms: enough to relax, not so much that guests slide.
3. Weight capacity and testing
Contract seating should be rated well above average body weight because the real load is dynamic — people drop into chairs. Ask for the static load rating on the kiln-dried hardwood and, if the chair stacks, how many units high it can be stacked without deforming. Both numbers belong on the spec sheet you sign off.
4. Stacking, nesting and storage maths
Storage decides whether you can host events. A stackable model at 5–10 units high turns a storage closet into real capacity. Measure your closet height before ordering, then subtract 10 cm for handling clearance — the specification that kills most storage plans is the ceiling, not the chair.
5. How to write the spec into your RFQ
Put six numbers in your request: seat height, seat depth, frame material and gauge, finish type, load rating, and quantity. Suppliers quote faster and you can compare line by line. Vague RFQs get vague quotes, and the difference shows up as a surprise on the invoice.
Specification snapshot
| Model | Material | Style | Typical use | Factory price | MOQ |
|---|---|---|---|---|---|
| JP Hot Sale Modern Solid Wood Hotel | Solid wood/Fabric | Modern | Dining room, Restaurant | $85–$85 | 6 pcs |
| JP Nordic Modern Minimalist Designer Wooden Fabr | Rubberwood/ash wood | Modern | Dining room, Restaurant | $65–$65 | 6 pcs |
| JP Wholesale Modern Wood Chair Solid Wood | Solid wood/rattan | Modern | Dining room, Restaurant | $95–$95 | 6 pcs |
| JP High-End Solid Wood Dining Table and | Solid wood/Rattan | Modern | Dining room, Restaurant | $75–$75 | 6 pcs |
| JP Modern Upholstered Solid Walnut Dining Armcha | Fabric Upholstered Leather | Modern | Dining room, Restaurant | $110–$110 | 6 pcs |
| JP Wholesale Fabric/leather Upholstery Armrest W | Solid wood | Modern | Dining room, Restaurant | $135–$135 | 6 pcs |
Models referenced in this article
JP Hot Sale Modern Solid Wood Hotel
JP Nordic Modern Minimalist Designer Wooden Fabric
JP Wholesale Modern Wood Chair Solid Wood
JP High-End Solid Wood Dining Table and
JP Modern Upholstered Solid Walnut Dining Armchair
JP Wholesale Fabric/leather Upholstery Armrest Wooden Chair
Key terms used in this guide
- solid wood dining chair — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
- solid wood dining chairs — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
- wooden restaurant chairs — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
- oak dining chair — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
- dimensions — the measurements that decide comfort: 45–48 cm seat height for dining, 65 cm for counters, 75 cm for bars.
- seat height — the measurements that decide comfort: 45–48 cm seat height for dining, 65 cm for counters, 75 cm for bars.
- dining chair manufacturer — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
- Foshan furniture factory — the furniture manufacturing cluster in Guangdong, China, where our own workshop and most of the supply chain sit.
Frequently asked questions
What is the MOQ for wooden chairs?
Stocked models start from 6 pieces per model and can be mixed within one container. Made-to-spec runs start higher because the line has to be set up for your finish.
How long does production take?
15–25 days after sample approval for most wooden chairs, plus 3–7 days for sampling and then transit. Custom fabric or colour adds about a week.
Can I get a sample before ordering?
Yes. We ship a single sample for approval; sampling is the step that fixes every later date, so we recommend doing it before locking an opening schedule.
Do you support custom colours and fabrics?
Yes — frame colour, upholstery fabric, seat density and logo application are all available on wooden chairs. Custom work adds roughly 5–10 days.
What seat height works with a standard table?
45–48 cm seat with a 72–75 cm table, leaving 27–30 cm of clearance. Counter and bar heights are 65 cm and 75 cm.
How many chairs stack safely?
Most stackable models in this range stack 5–10 high. Check the spec and subtract 10 cm from your storage height for handling clearance.
Next steps
Browse the full JP Furniture catalog, read the Solid Wood Dining Chairs archive, or request a factory quote with your quantity and finish. We answer quote requests within one working day.
Related reading: Cleaning & Maintaining Solid Wood Dining Chairs